Description

This is sold as a complete unit and I usually have stock of these.
The end cap is cleaned, bead blasted and reassembled then checked for fit and finish.

• New Brush Holders (MTS exclusive product)
• End cap painted, inside and out
• New brass screws and washers
• Brush plate riveted to end cap with brass rivets
• New sealed end bearing

You MUST specify the diameter of your armature’s end shaft in the order notes field so I know which end bearing to include.  Over the many years since the T starters were new, some well meaning folks have turn down the end shaft from stock so now its smaller diameter.  I can supply either 6201RS (12mm) or 6201-1/2-2RS (1/2″) size end bearings depending on your shaft diameter.